A plain-English local guide for Wickhambreaux homes, written to help you find the cause of damp before you spend money.
Wickhambreaux lies inside the Ickham, Wickhambreaux and Seaton conservation area, so many homes are likely to be older and may have had repairs of different dates. Damp here can be rain getting in, condensation in cold rooms, or a mix. Check gutters, render and pointing first, then heating and ventilation habits. If condensation turns out to be the cause in an owner-occupied home with a loft, a loft-mounted Dryzen system may suit.
Canterbury City Council is the authority for the Ickham, Wickhambreaux and Seaton conservation area, which the national planning data register shows was designated on 29 August 1969. Wickhambreaux falls within that area. A conservation area is a place judged to have special architectural or historic interest, and that usually goes with a good share of older buildings.
Older walls behave differently from modern cavity walls. They are often thicker and built of softer materials that let some moisture move through. Over the years many have been repaired with harder materials, painted with sealed paints or extended at different dates, and each change can alter where moisture goes. A damp patch in an older Wickhambreaux house is worth reading as a pattern before it is treated as one fault.
Cement render, plastic paint and gypsum plaster on an older wall can all hold moisture in. Finding out what is on the wall comes first, and removing any of it is a builder's job, not a dehumidifier's.
Patches that follow rain mean water is getting in, so check gutters, render, pointing and window seals. Spots that follow cold mornings, in corners and on glass, point to condensation. Bedroom windows that stream overnight are covered in our guide to bedroom condensation.
A Dryzen unit is mounted in the loft. In an older house with a steep roof and exposed timbers that may not be practical, and a survey will check.
Conservation area status can bring extra planning controls, and the rules depend on the council and on whether your building is listed. Before changing windows, render or the roof, check with Canterbury City Council what applies to your property. If you are not sure whether a job needs permission, ask before work begins.
Dryzen suits owner-occupied homes with a loft, because the unit is mounted there. Each unit is rated for 150 square metres and removes about 12 litres a day, and it uses about 20 pounds a year in energy. It is not suitable for rental properties unless the landlord authorises the changes. It does not repair leaks, rain penetration or rising damp, so those come first.
Start by measuring. A hygrometer in the coldest bedroom of an older house tells you whether you are living above the 60 to 65 percent level at which mould and dust mites do well, before you decide what to change. For the full evidence, calculator and printable cheat sheet, see The Healthy Home Humidity Guide.
Yes. It falls within the Ickham, Wickhambreaux and Seaton conservation area managed by Canterbury City Council. Check the boundary with the council before planning changes to the outside of a building.
Thick walls take a long time to warm, and surfaces that stay cold collect condensation. Rain getting in through render, pointing or gutters can add to it.
Yes. The survey is free and includes a check that your loft is suitable.
Roughly 50 to 55 percent relative humidity is a sensible target, within the 40 to 60 percent band commonly suggested. Sustained readings above about 60 to 65 percent favour mould and dust mites. A dehumidifier helps stop the conditions they depend on, it does not clean existing mould.
Sources: Planning Data (GOV.UK): Ickham, Wickhambreaux and Seaton conservation area; GOV.UK: Understanding and addressing the health risks of damp and mould in the home