Most newer walls are built as two layers of masonry with a gap between them. That gap is there for a reason: RICS says it stops moisture transferring from the outer leaf to the inner one. When something fills the gap, rain has a path inside.

Quick answer

RICS says a cavity wall can let moisture cross to the inside if the gap is filled, for example with rubble left from construction or poorly installed insulation. The source is rainwater, so patches tend to follow wet weather. Check the outside first, then ask a building surveyor with damp experience. The repair is to clear the cavity, not to dry the air.

Check this first

  1. Work out what your wall is. A cavity wall is two leaves of masonry with a gap between them. Older homes often have solid walls, which fail in other ways. If you are not sure, a surveyor can tell you quickly.
  2. Note when the patch appears. RICS defines penetrating damp as water moving from one side of a wall to the other. A patch that darkens after rain and fades in dry spells points that way. Write down dates and the weather.
  3. Walk round outside in the rain. RICS suggests checking for leaking or blocked gutters and rainwater pipes, poor pointing, cracked render, broken sealant around windows and doors, and raised ground levels next to walls.
  4. Ask what changed. New cavity insulation, building work, a raised patio or new render can all change how a wall handles water. RICS says to consider what has changed and address that before paying for damp-proofing.
  5. Rule out condensation and plumbing. Condensation shows on cold surfaces such as corners and ceilings near outside walls and worsens with steam. RICS also lists internal plumbing leaks, for example below baths or at broken shower seals.
  6. Get an independent survey. RICS advises a building surveyor with experience of building pathology and a Joint Position Statement 2022 compliant inspection, and warns against relying on a damp meter alone.

What you find, and what to do

What you findLikely causeWhat to do
Patch darkens after rain, fades when dryPenetrating damp, possibly a bridged cavityFix outside defects, then ask a surveyor to check the cavity. Not a dehumidifier job.
Patch began after cavity insulation was fittedPoorly installed or damp insulationContact the installer and get a survey. RICS says the repair includes clearing damp insulation.
Cold corner with mould, worst on cold morningsCondensationImprove extraction and heating, leave a gap behind furniture.
Damp low on the wall, ground raised outsideGround level bridging the damp-proof courseSurveyor to confirm, then lower the ground.
Wet patch below a bath or beside a pipePlumbing leakPlumber. Not a dehumidifier job.

RICS gives the repair for a blocked cavity as clearing the construction rubble and any damp insulation out of the cavity, then reinstalling suitable insulation if there was some before. That is a trades job and should follow a proper diagnosis. RICS also warns against buying expensive damp-proofing without first doing routine maintenance and considering what has changed.

In Canterbury and the villages around it. We do not have local figures on blocked cavities and will not invent any. The district has a wide mix of building types, from older solid-walled houses to later estates, so the first job is to work out which wall you have. Our pages for Thanington, with its mixed housing on the western edge of the city, and Sturry cover two very different kinds of neighbourhood.
When a dehumidifier is not the answer. Rain crossing a wall, a leaking pipe or a blocked cavity needs repairing at the source. A Dryzen unit is mounted in the loft, so a home with no usable loft is not a candidate, and rented homes are not suitable unless the landlord authorises the changes.

Where a Dryzen system fits. Once the wall is sound, a Dryzen system suits condensation-type damp in an owner-occupied home with a loft. It is a loft-mounted dehumidifier with insulated ductwork to the central area or stairway, covering 150 square metres per unit, and it helps stop the conditions mould and dust mites need. It does not repair leaks, failed render or rising damp.

Common questions

Can I see a blocked cavity from outside?

Not usually. RICS describes the effect rather than the sight: moisture can transfer across a filled cavity to the inside of the wall, so the first sign is normally a damp patch indoors. A surveyor can advise how to confirm what is in the cavity.

Is a blocked cavity the same as damp after cavity wall insulation?

They can overlap. RICS lists poorly installed insulation as one way the gap can be filled, and says the repair includes clearing damp insulation. Our guide to damp after cavity wall insulation covers what to check if the problem started after insulation work.

Will a dehumidifier dry out a wall that rain crosses?

No. If rain is reaching the inner leaf, the water source needs fixing first. A dehumidifier helps with condensation, not with water coming through the wall.

Not sure what is causing yours?

Book a free survey and we will tell you honestly whether it is condensation or something else, even if that means we are not the right fix.

Book a Free Survey

Keep reading

Sources: RICS, Damp and mould consumer guide: blocked cavities; RICS, Damp and mould consumer guide; Property Care Association, Penetrating damp.

Ready to Solve Your Home's Damp Problem?

Book your free, no-obligation survey today. Our specialist will assess your home and give you an honest recommendation.

Book Your Free Survey