An extractor fan only works if it is moving air, ducted outside, and left running long enough. Many are not.
Bathrooms and kitchens are where most of the steam in a house is made. Getting it out at source is cheaper than dealing with it once it has spread through the house.
An extractor fan only helps if it moves air, vents outside rather than into a loft, and runs long enough to clear the steam. Hold a tissue to the grille: if it does not stick, the fan is weak. Check the duct, run it after showering and while cooking, and treat a recirculating cooker hood as a last resort, because it does not remove moisture.
| What you find | Likely cause | What to do |
|---|---|---|
| Tissue falls off the grille | Weak or blocked fan | Clean or replace the fan, using an electrician for the wiring. |
| Duct ends in the loft | Steam going to the wrong place | Re-duct to the outside with insulated ducting. |
| Mould on ceiling, fan runs briefly | Not enough run time | Fit a timer or humidity-controlled fan. |
| No fan at all, window only | Ventilation not reliable | Add a fan or build a routine with an open window. |
Where a Dryzen system fits. It suits condensation-type damp in an owner-occupied home with a loft to mount the unit in. It does not repair leaks, failed render or rising damp, it is not suitable for rented homes unless the landlord authorises the changes, and a home with no loft is not a candidate.
Long enough to clear the steam. A timer or a humidity-sensing fan does this automatically, which is why the government guidance mentions humidity-controlled fans.
An opening window works if you actually open it, but in winter many people do not. A fan is more reliable.
Only if it vents to the outside. A recirculating hood mostly removes grease and smells.
Book a free survey and we will tell you honestly whether it is condensation or something else, even if that means we are not the right fix.
Book a Free SurveySources: GOV.UK, Damp and mould: understanding and addressing the health risks.