New homes are built to be warm and tightly sealed, and they are built with wet materials such as concrete, plaster and timber. In the first months and years that moisture has to go somewhere, while the people living there add more of their own through cooking, washing and breathing. The result is often streaming windows and damp corners that surprise owners who expected a dry home.

Quick answer

New-build condensation is usually a mix of construction moisture drying out and normal household moisture with too little ventilation. Keep trickle vents open, run extractor fans whenever there is steam, open windows when safe, heat the home steadily and keep air moving between rooms. Report persistent mould, stains or running water to the builder, especially while the home is under warranty.

Check this first

  1. Note where and when. Windows first thing in the morning, or the cold corners of a bedroom, point to condensation. A patch that appears after rain, or on one wall only, points to a leak or a building fault.
  2. Open the trickle vents and keep them clear. The NHBC advice is to keep trickle vents open to reduce condensation and to wipe away any that forms. Check that curtains, furniture or paint have not blocked them.
  3. Use the extractor fans and cooker hood every time. NHBC advises running them whenever steam is produced, such as cooking, drying clothes or bathing. The Energy Saving Trust suggests leaving them running for at least 15 minutes afterwards.
  4. Open windows when it is safe. A few minutes of fresh air a couple of times a day lets humid air out and bring in drier air. The Energy Saving Trust suggests at least five minutes, several times a day.
  5. Keep the home steadily heated and clear the clutter. NHBC advises keeping the home adequately heated, especially in cold weather, and clearing clutter so air can circulate between and within rooms. The Energy Saving Trust adds leaving gaps between furniture and external walls and keeping a 10 mm gap under internal doors.
  6. Measure it. A cheap hygrometer in the bedroom and living room shows whether humidity stays high all day or only spikes after cooking and showers. Dated readings and photos also help if you need to raise a problem with the builder.

What you find, and what to do

What you findLikely causeWhat to do
Wet windows that clear by mid-morningNormal moisture, too little ventilationVents open, fans on, wipe the glass, open windows briefly.
Damp or musty feel in the first winter that eases over timeConstruction moisture drying outSteady heat and ventilation. Keep an eye on it and take photos.
Mould on a cold corner or behind furnitureCold surface, still airClean it, pull furniture off the wall, improve airflow.
A patch that grows after rain, or a stain on a ceilingLeak or building defectReport to the builder. Not a dehumidifier job.

If mould appears, GOV.UK guidance says to use a mould and mildew product in preference to bleach, wearing a mask, gloves and goggles, and to keep windows open during and after the clean. Cleaning does not stop it coming back unless the cause is dealt with.

In Canterbury and the villages around it. Homes here range from period properties to recently built houses, and they need different advice. This page is for the recent builds. If your home is much older, our guide to damp in old and listed homes is the better place to start. You can also see our pages for Sturry and Littlebourne.
When a dehumidifier is not the answer. A dehumidifier does nothing for a leak, a plumbing fault or a building defect, and in a home that is still under warranty you should ask the builder before altering ventilation or fitting equipment. A Dryzen unit is mounted in the loft, so a home with no usable loft is not a candidate, and rented homes are not suitable unless the landlord authorises the changes.

Where a Dryzen system fits. Once construction moisture has dried out and the habits above are in place, some owner-occupied homes with a loft still have a condensation problem. A Dryzen system helps stop the conditions mould and dust mites need. It does not remove mould that is already there, and it is not a fix for leaks. A free survey will tell you honestly whether your home suits it.

Common questions

Is condensation normal in a new-build home?

Some is expected. The NHBC Foundation guide explains that many building materials retain construction moisture, which dries out steadily over time. Condensation that clears quickly when you ventilate is a habit and airflow issue. Mould, stains or water that keeps coming back is worth reporting.

Should I keep the trickle vents open?

Yes. NHBC advice is to keep trickle vents open to reduce condensation and to wipe away any that forms. Also run extractor fans or the cooker hood whenever you create steam, and open windows when it is safe to do so.

Who do I speak to about damp in a home that is still under warranty?

Start with the builder or developer and keep dated photos and humidity readings. Do not alter ventilation or fit equipment before you have asked, because it may affect any claim.

Not sure what is causing yours?

Book a free survey and we will tell you honestly whether it is condensation or something else, even if that means we are not the right fix.

Book a Free Survey

Keep reading

Sources: NHBC: New guide offers top tips to prevent moisture in new-build homes; Energy Saving Trust: How to get rid of damp; GOV.UK: Understanding and addressing the health risks of damp and mould in the home.

Ready to Solve Your Home's Damp Problem?

Book your free, no-obligation survey today. Our specialist will assess your home and give you an honest recommendation.

Book Your Free Survey