Black spots along the rubber seal, a wet sill every morning and mould creeping into the frame corners are common complaints, often just after new windows go in. The glass is rarely the fault. Moisture made inside the home is meeting the coldest surface in the room. This guide puts the checks in order, free ones first.

Quick answer

Mould on double glazing is usually condensation, not a faulty window. Moisture from cooking, washing and breathing condenses on cold frames and glass. Open the trickle vents, wipe the water away, ventilate when you cook or shower, and clean mould off with a mould and mildew product rather than bleach. Mist between the two panes is a different fault.

Check this first

  1. Note where and when it forms. GOV.UK describes condensation damp as moisture cooling and condensing onto colder parts of the building, for example window frames and corners. The Property Care Association says it is more apparent in winter, when windows and external walls are cold. Wet glass on cold mornings points here.
  2. Open the trickle vents and clear them. The Energy Saving Trust says trickle vents should normally be left open all the time. GOV.UK guidance asks whether vents are kept open and free from blockages. Dust, paint and blinds can all block them. If your windows have none, the Energy Saving Trust notes the home may already be too airtight.
  3. Wipe and clean safely. GOV.UK says mould can be removed from hard surfaces with an appropriate cleaning product and left to dry completely, and that mould and mildew products should be used in preference to bleach. Keep the door shut and a window open while you clean, and use a qualified professional for large areas.
  4. Cut moisture at the source. GOV.UK guidance suggests using extractor fans in kitchens and bathrooms, closing internal doors when cooking or showering, covering pans, drying laundry outdoors where possible and opening windows periodically. Our guide to drying laundry indoors has more.
  5. Check what changed. GOV.UK notes that some energy efficiency improvements can reduce overall ventilation, so ventilation needs checking alongside them. If mould started after new windows, ask the installer what ventilation they planned. Installing windows is controlled building work and should be done by someone competent.
  6. Look at the frame and wall. The Property Care Association lists decay in window frames among the problems of ignored condensation. Press a timber frame with a screwdriver tip, and check the wall beside the window for a cold spot.

What you find, and what to do

What you findLikely causeWhat to do
Wet glass and sill in the morning, black spots on the sealCondensationOpen trickle vents, wipe dry, ventilate when cooking and showering, clean mould off with a mould and mildew product.
Mist or droplets between the two panesFailed sealed unitContact the window company or installer to replace the unit. Not a dehumidifier job.
Mould on the wall and reveal around the windowCold spot beside the openingSee our guide to cold spots and cold bridging.
Staining below the frame after rainWater getting in from outsideCheck the frame sealant and gutters. See our gutter checklist.
Soft or decayed timber frameLong-term moistureAsk a joiner or window repairer, and fix the moisture source.
In Canterbury and the villages around it. Many homes around the city are old, and windows in a listed building or conservation area need care. Harbledown has a conservation area High Street with many listed buildings, so ask Canterbury City Council before changing windows there. In Chilham, ask Ashford Borough Council. Our guide to damp in old and listed homes explains why old walls and tight new windows can fight each other.
When a dehumidifier is not the answer. A dehumidifier will not repair a failed sealed unit, stop rain getting past a frame, or remove mould that is already there; existing mould must be cleaned off. Closed trickle vents and unvented moisture sources are cheaper to fix first. Rented homes are not suitable for a Dryzen system unless the landlord authorises the changes, and it needs a loft to mount in.

Where a Dryzen system fits. If the vents are open, the sealed units are sound and an owner-occupied home with a loft still shows high humidity, a Dryzen system may help. It is a loft-mounted dehumidifier with insulated ductwork to the central area or stairway. Each unit covers up to 150 square metres, extracts about 12 litres a day and costs about 20 pounds a year to run. It helps stop the conditions mould and dust mites need. A free survey will say honestly whether it suits your home.

Common questions

Why is there mould on my new double glazing?

Double glazing keeps rooms warmer, but moisture made indoors still condenses on the coldest surfaces. GOV.UK describes condensation damp as moisture that cools and condenses onto colder parts of a building such as window frames and corners. Windows are often where it shows first.

Should trickle vents be open or closed?

The Energy Saving Trust says trickle vents should normally be left open all the time to give enough fresh air. GOV.UK guidance on damp and mould says vents should be kept open and free from blockages.

What if there is condensation between the panes?

The Glass and Glazing Federation says that on rare occasions condensation between the panes means the seal of the sealed unit has failed. The unit then needs replacing, which a window repair company can usually do. A dehumidifier will not fix it.

Mould back on your windows?

Book a free survey and we will tell you honestly whether it is condensation, a failed window or something else, even if that means we are not the right fix.

Book a Free Survey

Keep reading

Sources: GOV.UK, Understanding and addressing the health risks of damp and mould in the home; Energy Saving Trust, Draught proofing; Property Care Association, Condensation advice; Glass and Glazing Federation, When to repair or replace your windows

Ready to Solve Your Home's Damp Problem?

Book your free, no-obligation survey today. Our specialist will assess your home and give you an honest recommendation.

Book Your Free Survey